How To Use a Post Hole Digger Like a Pro! (Complete Guide)


When it comes time to do some serious digging, you need a post-hole digger. This simple machine can make light work of what would otherwise be a back-breaking task. 

However, using a post hole digger can be tricky if you don’t know how to do it properly. 

Here is the step-by-step guide on how to use a post hole digger like a pro!

What is a Post Hole Digger?

Post-hole diggers are a great way to make fence posts, deck posts, or any other post without using a pick and shovel. 

It is also a kind of digger that can be used to plant trees and shrubs. 

Due to its similarity to a seashell, a post-hole digger is sometimes known as a clamshell digger.

The tool’s appearance varies, but it usually resembles two shovels connected.

There are two types of post-hole diggers: manual and power

Manual post hole diggers require physical labor to turn the blades, while power post hole diggers use an engine to do the turning for you.

It contains sharpened blades that pierce the earth on impact, making hole digging easier, as well as extended handles to drill holes of varying depths and widths.

The two shovels work in tandem, digging into the ground to make a hole and then clamping together to remove loose soil.

What is a Post Hole Digger Used For?

As the name implies, a post hole digger is a tool used to help dig holes for posts. 

There are different post-hole diggers, but they all work in basically the same way. 

The concept behind using a post-hole digger is to force the tool into the soil with your body weight, then use the tool’s lever-action to pull the soil out from around the post.

The best way to use a post hole digger is to start by digging a small hole next to where you want your post to go. 

It will help you get an idea of how deep your hole needs to be, and it will also help you find any rocks or other objects that may be in your way. 

Once you have dug your starter hole, place the post hole digger over it and push it down into the ground.

Below is the step-by-step guide on using a post-hole digger correctly and effectively.

Easy Steps to Use a Post Hole Digger

The post hole digger is essential when looking to put in a new fence or post. It can make the job much easier and faster. 

Before digging your post holes, keep in mind that is wet soil is easier to dig than firm, clay-like dirt or dry, sandy soil.

If required, hydrate the soil by hosing it down with water and allowing it to absorb the moisture before digging.

Here are some tips on how to use a post hole digger:

STEP ONE: Grip the Handles

Posthole diggers are handy tools that can be used to create a hole underground.

However, using these tools is not an easy task. Many people regularly grip their post hole digger with one hand and use their other hand for balance. 

It is not secure and puts the user at risk of falling into a dangerous situation. 

To avoid any circumstances, securely grasp the handles of your post hole digger with both hands, level on either side.

STEP TWO: Make a hole in the ground

Lift the tool above your head so that the open blades pierce the ground, and then push it down with enough force to penetrate the soil. It will break the earth below, effectively creating a hole. To get an outline of your hole, you may need to repeat this step a few times at first.

STEP THREE: Loosen the Ground

Move the blades around in the ground with the handles to loosen the soil.

STEP FOUR: Secure the Soil

Bring the blades together with the handles to firmly grip the soil.

STEP FIVE: Take Out the Soil

Remove the soil from the hole by pulling the tool upwards while keeping the blades closed around it.

STEP SIX: Make a Soil Deposit

You can deposit the soil to one side of the hole by opening the blades.

STEP SEVEN: Do it again.

Repeat the previous stages, digging deeper with each thrust until your hole has reached the needed depth and width to support the post.


Using a post hole digger is a great way to get the job done quickly and efficiently. By following the simple steps in this blog, you can use your post hole digger like a pro and have your project completed in no time!

For more Articles, Please Visit our website :

Related Articles