Tips and Guide for Chainsaw Chain (Explained for Beginners)


The chainsaw chain is the most used chain for chainsaw users. They also have a variety of styles to choose from. The chainsaw chain is made from different types of steel, each with its strengths and weaknesses. It can be hard to know which chainsaw chain is best for your needs with many other options. 

A chainsaw is a handy tool to have around the yard, but you should never take it anywhere without the proper chainsaw chain. This chainsaw chain is not just a part of the chainsaw, and it is an essential part of it. So, it is vital to have the right chainsaw chain. 

Here, we’re going to look at what chainsaw chains tips and guides, as well as which chainsaw chain is preferable.

What is a Chainsaw Chain?


Chainsaw chains are the essential part of your chainsaw. They are what connects the saw to the engine. The saw and engine are separated by the chainsaw chain, which acts as a drive belt.

It is a type of chain that is used for purposes such as cutting, splitting, and grinding. Chainsaw chain is usually characterized by its strength and durability and can be crafted from various kinds of metal, including steel, bronze, or brass. Chainsaw chain can be used for multiple purposes, but it is most commonly used for cutting.

How to install a Chainsaw Chain?

  1. Remove the side panel of the guiding bar.
  2. Release the tension on the chain to easily loosen.
  3. Detach the old chainsaw chain.
  4. Remove the tensioning screw and loosen it.
  5. Attach the saw to the new chain.
  6. Ensure that the guide bar is in the proper position
  7. Replace the plate on the side.
  8. Adjust the tension on the chain to the proper level.
  9. Tighten the side plate nuts to the desired level.

How to maintain a Chainsaw Chain?

  • It needs to be properly oiled.

The oil supply to the chainsaw’s guide bar and chain is meant to be consistent. It’s the way they’re set up. The parts would overheat, seize, and not cut properly if they didn’t get lubrication. They would also be harmed by friction.

If the chain oiling system is supplying oil, it should be checked regularly. Instead of wasting oil from other engines, we propose using oil developed explicitly for chains and chain bars.

On the other hand, used vehicle component oil has no such properties and is likely to be full of contaminants and metal that could harm your equipment.

  • Tensioned Correctly

The worst-case scenario is that a loose chain will fly off the chain bar, causing you to lose time getting it back on and risking injury to your hands or legs (unless you’re wearing protective gloves or chaps!).

A loose chain also raises the likelihood of a retaliatory attack. Nobody wants to be hit in the face with a kickback blade.

The sprocket will wear out if the chain is not tensioned correctly, putting greater pressure on it.

A properly tensioned chain has been adjusted to touch the guide bar all the way around. It should be snug, but it should be pulled forwards from the chainsaw body to the tip of the guide bar.

  • Sharpen the chain

It just seems like a good idea to keep your chain cutters in good working order, with no damage, and with a sharp edge.

The primary rule is to sharpen your chain according to the manufacturer’s recommendations.

You’ll only need a circular file with a handle and a file guide at the most basic level to sharpen the chain.

When it comes to chain maintenance, it’s essential to keep the cutters in the same length and form throughout the chain’s life.

  • Set in the correct depth gauge.

It’s easy to neglect or dismiss this aspect of chain maintenance, but as usual, doing it well will ensure a good and safe cut.

The thickness of the chip removed from your wood target by the cutter is controlled by the depth gauge.

As your device’s maker advised, a flat-file and a suitable depth measurement tool are essential for this procedure.

Place the depth gauge tool over the cutter to ensure the correct gauge. From the inside of the cutter outwards, the surplus is filed off.

After four or five sharpenings, it’s a good idea to check the depth gauges.

What chainsaw chain cuts the fastest?

A full chisel chain is the fastest cutting blade shape available. The number of teeth on a complete chisel chain is likewise more than on other types of chains (a full chisel is also known as a standard chisel chain). On most bars under 24 inches, the squared shape of the teeth allows for a quick and clean cut.

The complete chisel chain is generally considered the best tool to use if you want to cut wood, especially softwood, fast and simple. The chain’s large number of teeth guarantees that the cut is clean and smooth throughout, giving you a finish you’ll be delighted with.

Ideal Tightness of Chainsaw Chains

The chainsaw chain will naturally stretch and become loose on the guide bar when operating. When using it, though, make sure it isn’t too loose, or it won’t be as effective and could be harmful. Before you use the chainsaw, make sure you check the tension frequently to ensure you’re not putting yourself in danger. The speed at which it spins can come off the bar if the chain is too loose, which can be pretty dangerous.

It would be best to try to lift the chain off the bar to ascertain the optimal tension. You shouldn’t be able to pull the chain links off the chain bar if it’s a bit loose. You know it’s tight enough if the chain links stay connected when you try to pull it. You will need to increase the chainsaw tension to pull the entire chain away from the chain bar, and the chain links are no longer connected. Make sure you don’t tighten the chain too much. Before you go to work, there needs to be a little play in the chain. You run the danger of breaking the chain while it’s in use if it’s excessively tight.

Final Thoughts

A chainsaw chain is an excellent tool for chainsaw users, but it’s essential to keep it in good condition.

You must know how to replace your chainsaw chain and that this will help you avoid having accidents and help give proper care to the machine.

We hope you enjoyed our blog about chainsaw chains. We know that chainsaw chains can be a tough subject to talk about and that not everyone understands how it works. We’ve provided all the information you need, as well as some tips to help you out to prevent any possible problems.